slk
Enthusiastic about Wooden Canoes
Ok guys I will be applying a clear epoxy finish to my canoe. When planking it all the planking joints were pretty tight. Since it has been sitting in my shop now those joints have become a little opened up. I can't do any epoxy work until springs gets here. My big question is since I will be epoxying it with fiberglass cloth will I have to fill those joints before I start or will the epoxy be thick enough not to drip through those joints. I am sure they will swell back up some when we get some decent weather. I keep my shop at 45* for the most part. The red cedar planking was very dry when I started this project, as it was from a wall from 1954.
Steve
Steve